5 Top Signs Your Garage Door Opener Is Failing

Signs Your Garage Door Opener Is Failing

When having an automatic garage door, proper maintenance is key. That’s why today we bring you some alarming signs your garage door opener is failing

Automatic garage doors grant homeowners a wide array of benefits. From providing your home security to giving you convenience, automatic garage doors are an excellent asset for any house. For this reason, you need to know which are the signs of a bad garage door opener.

Garage Door Opener Not Working? Top Signs Your Garage Door Opener Is Failing

Whether time has taken a toll on your opener or you might be counting on snapped cables, faulty garage door openers can be a burden for anyone. After all, an unreliable automatic garage door is the least any homeowner would want.

These are some warning signs your garage door opener is failing:

  • Your garage door is noisy.
  • It’s not as fast as before.
  • Your garage door opens but then closes.
  • Garage door doesn’t fully close nor open.
  • It doesn’t respond to your remote nor switch.

Let’s go over each of these bad garage door opener signs:

Your Garage Door Is Noisy

Of course, it’s quite common for openers to start having trouble after some time. However, you should definitely call a professional when your garage door starts to do the following things:

  • Clanking
  • Squeaking
  • Creaking

In most cases, garage door openers become too noisy because they’re struggling with the garage door’s weight. When your opener starts having trouble with this type of issue, it’s a warning sign that it needs replacement.

Additionally, this type of problem usually happens with older models, especially if they’re chain drive. Newer models, such as belt drive openers, don’t often come with this sort of issue. 

Lastly, old opener models tend to present the problem of vibrating. Although it might seem harmless, when this happens, it can make your opener break free, ultimately falling to either your car or onto the ground. For this reason, it’s best to count on a newer model.

It’s Not as Fast as Before

When automatic garage doors start to become slow and sluggish, it can be a telltale sign that your opener is malfunctioning. 

Although it’s expected for garage doors to open at a medium pace, when your garage door opens much slower than it did before, then you should consider checking it out. It might be that your opener is struggling with your garage door’s weight. 

Your Garage Door Opens, But Then Closes

When your garage door opens a little and then stops, then it’s probably because your opener’s safety sensors aren’t working correctly or if they’re unaligned. 

A good idea is first to check them to see if they’re aligned or not. Using your garage door opener’s manual, check if they’re correctly positioned. If this doesn’t work, then clean the photo eye sensors with a soft cloth.

Also, make sure that your garage’s floor is clean. There are many times debris might cause your garage door to reverse since it can confuse the sensors.

Lastly, there are cases in which your garage door might reverse before or after hitting the floor. There are many reasons why this might happen. For instance, rusted rollers can make the door stop prematurely. You can fix this by keeping rollers in lubricated and in good condition.

Additionally, you would want to check the close-limit switch and the close-force settings as well.

Garage Door Doesn’t Fully Close nor Open

When your opener doesn’t fully open nor close the door, this can be due to two main reasons: a damaged up-limit switch or faulty rollers.

Limit switches help tell openers when to lift and when to lower your garage door. In other words, it tells it when to stop running as well. When your up-limit switch becomes faulty, it can cause your door not to fully close nor open. 

Being a common problem for newly installed openers, you can fix this problem quickly. Simply move your up-limit switch closer to the opener’s motor unit. A faulty limit switch can cause your garage door; however, the motor might still be running. On the other hand, another reason that might prevent your door from completely opening or closing is damaged rollers. By replacing the bad ones and lubricating the rusty ones, you’ll have a fully functioning garage door.

It Doesn’t Respond to Your Remote nor Switch

There are many reasons why your garage door won’t open with a remote nor your switch. However, before blaming the opener, you should check for the following things:

  • See if your remote control’s batteries are ok.
  • Move closer to your door since not all remotes have high radio frequency.
  • Reprogram your remote control.

When it comes to the right way how to fix a garage door opener remote, you can follow these easy guidelines:

  • Change your control’s batteries. 
  • Check if the battery contacts aren’t wet or worn out. If they are, you can polish them with a fine-grit sandpaper.
  • Reprogram your remote control by following the instruction that is in your garage door opener’s manual. Remember that there are different reprogramming methods of garage door remotes.
  • Clean your remote’s eyes with a soft damp cloth. If the eyes are badly scratched, then it’s time to get a new remote.

Lastly, when your garage door wall switch is not working, you’ll need to test the switch. If your wall switch has two wires, carefully detach them from the switch. Then, carefully touch them together. 

If there’s a response from your garage door, all you need to do is change the switch. However, if there isn’t any response, then call your professional garage door repair technician. They’ll know if you’ll need to repair or replace the wires.

When Should You Get a New Garage Door Opener?

Of course, most signs your garage door opener is failing can be fixed right away. However, when applying all quick fixes mentioned above and still presenting problems, it’s always best to have a technician take a good look at your opener. That way, you can be sure that your garage door operates properly.